Save

Save


Save

Save

Savekj

search-glitter-frame
sign-up-image-for-happyletter
Save Save
shop-glitter-frame
Save

Save

shop-the-glitter-in-my-tea-co

Save

Save

featured glitter frame

Save

Save

Save

Save

archives glitter frame_1

Archives

DIY Toy Donut Truck Thumb Drive

I was given free product from Oriental Trading in return for this blog post.This review is based strictly on my opinion. I was provided the sample free of product charge by the company to provide my honest review. No other type of compensation was received. All ideas and opinions are my own.

DIY Toy Donut Truck Thumbdrive 1

DIY Toy Donut Truck Thumbdrive 2

Sometimes thumb drives are just ugly, and sometimes the cute ones are expensive, or aren’t exactly your taste. So when I saw these cute, toy donut trucks on Oriental Trading, I freaked out! I knew that one of those lucky trucks’ destiny was to be turned into a thumb drive!

My favorite part of using my new thumb drive is backing up the truck into the USB port. Tee hee!!!!! It’s like, “donut delivery!” Hahahahah!

DIY Toy Donut Truck Thumb Drive

  • Plastic, toy donut truck OR other plastic, toy car/truck
  • Thumb drive
  • Drill
  • Sharpie pen
  • Sturdy scissors
  • Super glue
  1. Start by approximating where you’re going to insert the body of the thumb drive. Hold it on it’s tail end where you’ll drill a few holes, and, using the Sharpie, trace around the thumb drive’s circumference.
  2. Next, carefully drill two holes inside the circle/rectangle/oval/etc. you just drew.
  3. Use your sturdy scissors to carefully snip off any remaining plastic.
  4. If you’re able to, remove the bottom of the toy truck/car. Now insert the thumb drive into the hole you’ve created. *NOTE: It should fit snug.*
    NOTE: Make sure the thumb drive is facing the right direction, so that when you go to plug in your new thumb drive, you won’t have to flip the toy truck upside down!
  5. If you were able to take off the bottom of the truck, squirt a thin line of super glue on the inside of the truck/car where the thumb drive meets top of the hole you made.
    If you’re not able to take off the bottom of the truck, squirt a thin line of super glue on the outside of the truck where the thumb drive meets the top of the hole you made.
    Let the glue dry over night, or for however long the glue’s directions specify.
  6. If you removed the bottom of the truck, attach the bottom of the truck again, and…
  7. …Your new thumb drive is ready for use!

DIY Toy Donut Truck Thumb Drive 3

DIY Toy Donut Truck Thumb Drive 4

Other Posts You’ll Love: DIY Magnetic Ice Cream Cone Paperclip Dispenser // DIY Stapler in Jell-O Paperweight Inspired By The Office

 

Save

signature divider
Share on FacebookTweet about this on TwitterEmail to someonePin on PinterestGoogle+share on Tumblr

DIY Justin Bieber Heart Balloons

Justin Bieber Heart Balloons 1

Justin Bieber Heart Balloons 2

DIY Justin Bieber Heart Balloons

First of all, I must wish you all a Happy almost-Valentine’s Day! (It’s 3 days away! *insert shocked emoji face*)

Second of all, I must inform you all that I’ve become a huge Bieber fan! And this DIY now probably officially makes me a “Belieber.”

I remember thinking to myself back in the “Baby, baby, baby OHHHH” days, “I don’t like this song, but I’m a big enough person to admit that this guy has a great voice, and he’s gonna grow up to probably still have a great voice. So who am I to rule him out of my music taste so hastily?” Good thing I didn’t! Cuz his album, “Purpose” is my go-to, doing-the-dishes music! And driving music.

Third of all, I must apologize to you all if this DIY is a little more risque than all my previous DIYs. But hey! It’s Valentine’s Day!!!

Make these Justin Bieber heart balloons for your fellow Belieber and I bet they’ll love you forever.

Supplies:

  • Heart mylar balloons
  • Glue stick
  • Large black + white photos of Justin Bieber (or any other heart throb you’re currently into)
  • Stickers
  1. Do a little searching on the web for 3-5 photos of Justin Bieber. If you find a photo you love that is in color, I’ll show you how to turn it into black and white!
    HOW TO MAKE PHOTOS BLACK & WHITE: (1) Save your high-res photo to your computer. (2) Go to pixlr.com/editor, and open your photo. (3) Click on Adjustment > Desaturate. Voila! Your photo is black and white! (4) Save your photo.
  2. Cut out your images.
  3. Apply glue to the back, then stick your image onto the heart balloon. Smooth out any creases or bubbles

That’s it!

DIY Justin Bieber Heart Balloons 3

DIY Justin Bieber Heart Balloons 4

Are you a Belieber?? What is your favorite song? Let me know in the comments below!

Other Posts You’ll Love: DIY Ultimate Valentine

Ultimate Valentine DIY

 

 

 

Save

Save

Save

signature divider
Share on FacebookTweet about this on TwitterEmail to someonePin on PinterestGoogle+share on Tumblr

Free Printable Planner Stickers

Free planner stickers 3

Free planner stickers 2

Free Printable Planner Stickers

I’m very excited to bring you these free agenda/planner stickers! I teamed up with Megan McNulty, and we collaborated on these super adorable illustrations!

All you need to do to turn this printable into stickers is to print them on full-sheet sticker paper, then cut them out! Orrrr if you wanna just print them on regular copier paper, you can cut them out and use a glue sticker to adhere them to your planner! (That’s what I did for this photo shoot, but I think I’ll turn them into stickers to use in my own planner!) ORR you can use them for scrapbooking! That works too!

All you have to do to get these super adorable stickers is just sign up for my newsletter! It’s that simple!

Sign up here!

Subscribe to get the FREE planner stickers!



 

Free planner stickers 1

Free planner stickers 4

Save

Save

signature divider
Share on FacebookTweet about this on TwitterEmail to someonePin on PinterestGoogle+share on Tumblr

Save

Save


Save

Save

Savekj

search-glitter-frame
sign-up-image-for-happyletter
Save Save
shop-glitter-frame
Save

Save

shop-the-glitter-in-my-tea-co

Save

Save

featured glitter frame

Save

Save

Save

Save

archives glitter frame_1

Archives

DIY Toy Donut Truck Thumb Drive

I was given free product from Oriental Trading in return for this blog post.This review is based strictly on my opinion. I was provided the sample free of product charge by the company to provide my honest review. No other type of compensation was received. All ideas and opinions are my own.

DIY Toy Donut Truck Thumbdrive 1

DIY Toy Donut Truck Thumbdrive 2

Sometimes thumb drives are just ugly, and sometimes the cute ones are expensive, or aren’t exactly your taste. So when I saw these cute, toy donut trucks on Oriental Trading, I freaked out! I knew that one of those lucky trucks’ destiny was to be turned into a thumb drive!

My favorite part of using my new thumb drive is backing up the truck into the USB port. Tee hee!!!!! It’s like, “donut delivery!” Hahahahah!

DIY Toy Donut Truck Thumb Drive

  • Plastic, toy donut truck OR other plastic, toy car/truck
  • Thumb drive
  • Drill
  • Sharpie pen
  • Sturdy scissors
  • Super glue
  1. Start by approximating where you’re going to insert the body of the thumb drive. Hold it on it’s tail end where you’ll drill a few holes, and, using the Sharpie, trace around the thumb drive’s circumference.
  2. Next, carefully drill two holes inside the circle/rectangle/oval/etc. you just drew.
  3. Use your sturdy scissors to carefully snip off any remaining plastic.
  4. If you’re able to, remove the bottom of the toy truck/car. Now insert the thumb drive into the hole you’ve created. *NOTE: It should fit snug.*
    NOTE: Make sure the thumb drive is facing the right direction, so that when you go to plug in your new thumb drive, you won’t have to flip the toy truck upside down!
  5. If you were able to take off the bottom of the truck, squirt a thin line of super glue on the inside of the truck/car where the thumb drive meets top of the hole you made.
    If you’re not able to take off the bottom of the truck, squirt a thin line of super glue on the outside of the truck where the thumb drive meets the top of the hole you made.
    Let the glue dry over night, or for however long the glue’s directions specify.
  6. If you removed the bottom of the truck, attach the bottom of the truck again, and…
  7. …Your new thumb drive is ready for use!

DIY Toy Donut Truck Thumb Drive 3

DIY Toy Donut Truck Thumb Drive 4

Other Posts You’ll Love: DIY Magnetic Ice Cream Cone Paperclip Dispenser // DIY Stapler in Jell-O Paperweight Inspired By The Office

 

Save

signature divider
Share on FacebookTweet about this on TwitterEmail to someonePin on PinterestGoogle+share on Tumblr

DIY Justin Bieber Heart Balloons

Justin Bieber Heart Balloons 1

Justin Bieber Heart Balloons 2

DIY Justin Bieber Heart Balloons

First of all, I must wish you all a Happy almost-Valentine’s Day! (It’s 3 days away! *insert shocked emoji face*)

Second of all, I must inform you all that I’ve become a huge Bieber fan! And this DIY now probably officially makes me a “Belieber.”

I remember thinking to myself back in the “Baby, baby, baby OHHHH” days, “I don’t like this song, but I’m a big enough person to admit that this guy has a great voice, and he’s gonna grow up to probably still have a great voice. So who am I to rule him out of my music taste so hastily?” Good thing I didn’t! Cuz his album, “Purpose” is my go-to, doing-the-dishes music! And driving music.

Third of all, I must apologize to you all if this DIY is a little more risque than all my previous DIYs. But hey! It’s Valentine’s Day!!!

Make these Justin Bieber heart balloons for your fellow Belieber and I bet they’ll love you forever.

Supplies:

  • Heart mylar balloons
  • Glue stick
  • Large black + white photos of Justin Bieber (or any other heart throb you’re currently into)
  • Stickers
  1. Do a little searching on the web for 3-5 photos of Justin Bieber. If you find a photo you love that is in color, I’ll show you how to turn it into black and white!
    HOW TO MAKE PHOTOS BLACK & WHITE: (1) Save your high-res photo to your computer. (2) Go to pixlr.com/editor, and open your photo. (3) Click on Adjustment > Desaturate. Voila! Your photo is black and white! (4) Save your photo.
  2. Cut out your images.
  3. Apply glue to the back, then stick your image onto the heart balloon. Smooth out any creases or bubbles

That’s it!

DIY Justin Bieber Heart Balloons 3

DIY Justin Bieber Heart Balloons 4

Are you a Belieber?? What is your favorite song? Let me know in the comments below!

Other Posts You’ll Love: DIY Ultimate Valentine

Ultimate Valentine DIY

 

 

 

Save

Save

Save

signature divider
Share on FacebookTweet about this on TwitterEmail to someonePin on PinterestGoogle+share on Tumblr

Free Printable Planner Stickers

Free planner stickers 3

Free planner stickers 2

Free Printable Planner Stickers

I’m very excited to bring you these free agenda/planner stickers! I teamed up with Megan McNulty, and we collaborated on these super adorable illustrations!

All you need to do to turn this printable into stickers is to print them on full-sheet sticker paper, then cut them out! Orrrr if you wanna just print them on regular copier paper, you can cut them out and use a glue sticker to adhere them to your planner! (That’s what I did for this photo shoot, but I think I’ll turn them into stickers to use in my own planner!) ORR you can use them for scrapbooking! That works too!

All you have to do to get these super adorable stickers is just sign up for my newsletter! It’s that simple!

Sign up here!

Subscribe to get the FREE planner stickers!



 

Free planner stickers 1

Free planner stickers 4

Save

Save

signature divider
Share on FacebookTweet about this on TwitterEmail to someonePin on PinterestGoogle+share on Tumblr